Our company produce vertical turbine pump,vertical long axis pump, vertical type condensate pump ,vertical wet pit pump,right Angle gear box
Manufacturer of vertical turbine pumpFocus on vertical wet pit pump, right Angle gear box
HOTLINE:+8618507312158+8613974960765
Contact us
Vertical turbine pump manufacturers
HOTLINE::+8613974960765
Mobile:+8618507312158
Email:sale@ljpump.net
Address :China's hunan province changsha furong road long xiang industrial park
Your position: HOME >> Knowledge >> vertical turbine pump
vertical turbine pump

The FEATURES of vertical turbine pumps

DATE:2023/12/8 17:09:13 Source:Vertical Turbine Pump Manufacturer and Vertical Suspension Pump Prices Provider Visits:

The FEATURES of vertical turbine pumps


The vertical turbine pump casing material is a minimum of class 30 cast iron. The bearing bracket supports are cast integral with the lower casing half for permanent alignment of bearings and all rotating parts. Bronze, renewable casing rings are doweled and shouldered in the casing.

Cast bronze, one-piece impeller is hydraulically and dynamically balanced for vibration-free performance and longer bearing life. The impeller is keyed to the shaft for positive driving. Bronze impeller wear rings are securely fastened to the impeller and machined to close tolerances to permit minimum re-circulation of pumped liquid.

Stuffing boxes can accommodate several mechanical seal types and a variety of API seal flush plans. The gland bolts are swing type and made of steel with 18-8 stainless steel nuts. Stuffing boxes are designed to hold a minimum of five rings of packing with a lantern ring. Split glands facilitate removal for re-packing.

vertical turbine pumps

Replaceable bronze or optional hardened 316 stainless steel shaft sleeves protect the carbon steel or optional heat-treated stainless steel shaft through the stuffing box. The shaft sleeves extend beyond the mechanical seal or packing glands for maximum shaft protection. Sleeves are sealed by O-rings. Grease-lubricated ball bearings are designed for an average life of 80,000 hours. Inboard bearings are single row, radial ball bearings. Outboard bearings are duplex angular contact ball bearings. (optional oil lubricated).

The vertical turbine pumps and driver are mounted on a common steel base (optional drip rim), coupled by a flexible coupling and furnished with a coupling guard. Turbine pumps and driver are aligned and bolted in place prior to factory shipment.


Online Service
Contact

TEL

+8618507312158

+8613974960765

WeChat
Online
Service